Woods-powr-grip MTCL8FS10TDC Manuel d'utilisateur

KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version MODEL NUMBER: MTCL8HV11FDC SERIAL NUMBER: ___________ (please see serial label and

Rev 6.0/12-13 8 8 MTCL8HV11FDC: #35079 4) To use the movable control pendant (instead of the optional Remote Control System), insert the plug of i

Rev 6.0/12-13 9 9 MTCL8HV11FDC: #35079 Pad Spread and Maximum Load Capacity (larger configurations shown with pad frame extensions)

Rev 6.0/12-13 10 10 MTCL8HV11FDC: #35079 To Install/Remove Pad Frame Extensions 1) Insert the end of a pad frame extension in one socket on the ma

Rev 6.0/12-13 11 11 MTCL8HV11FDC: #35079 INTENDED USE LOAD CHARACTERISTICS WARNING: This lifter is NOT intended for lifting hazardous materials,

Rev 6.0/12-13 12 12 MTCL8HV11FDC: #35079 OPERATING ENVIRONMENT The operator must determine whether the lifter is intended to be used in each work e

Rev 6.0/12-13 13 13 MTCL8HV11FDC: #35079 TYPICAL APPLICATIONS Though the lifter is designed with the flexibility to be used in many different ways,

Rev 6.0/12-13 14 14 MTCL8HV11FDC: #35079 OPERATION BEFORE USING THE LIFTER The operator must determine whether the lifter is capable of performing

Rev 6.0/12-13 15 15 MTCL8HV11FDC: #35079 CAUTION: Examine each air filter regularly, and empty when necessary. Two air filters help protect the va

Rev 6.0/12-13 16 16 MTCL8HV11FDC: #35079 If the lifter is equipped with a Remote Control System, press the transmitter power/enable button and hold

Rev 6.0/12-13 17 17 MTCL8HV11FDC: #35079 Sealing the Pads against the Load The apply/release switch is located on the movable control pendant. The

Rev 6.0/12-13 18 18 MTCL8HV11FDC: #35079 Vacuum Level on Optimal Surfaces When the lifter is attached to clean, smooth, nonporous load surfaces, it

Rev 6.0/12-13 19 19 MTCL8HV11FDC: #35079 TO LIFT AND MOVE THE LOAD Positioning the Lift Bar WARNING: Lift bar must be oriented vertically to lift

Rev 6.0/12-13 20 20 MTCL8HV11FDC: #35079 Controlling the Lifter and Load When vacuum indicators show that the lifter is ready, use the hoisting equ

Rev 6.0/12-13 21 21 MTCL8HV11FDC: #35079 TO TILT THE LOAD WARNING: Make sure load is positioned correctly on lifter (see TO APPLY); unbalanced loa

Rev 6.0/12-13 22 22 MTCL8HV11FDC: #35079 time during the tilt: To lock out the tilt latches, push the tilt control lever all the way upward until

Rev 6.0/12-13 23 23 MTCL8HV11FDC: #35079 AFTER USING THE LIFTER Leave the apply/release switch in the neutral position and place the power switch i

Rev 6.0/12-13 24 24 MTCL8HV11FDC: #35079 MAINTENANCE WARNING: Always make sure battery is disconnected before servicing lifter. Note: One or mor

Rev 6.0/12-13 25 25 MTCL8HV11FDC: #35079 • Keep a written record of all Periodic Inspections. If any deficiency is detected during the inspection,

Rev 6.0/12-13 26 26 MTCL8HV11FDC: #35079 MAINTENANCE SCHEDULE Unless specified elsewhere in this INSTRUCTIONS manual, the lifter does not require m

Rev 6.0/12-13 27 27 MTCL8HV11FDC: #35079 Temperatures higher than 70° Fahrenheit [21° Celsius] require the battery to be charged more frequently. I

Rev 6.0/12-13 1 1 MTCL8HV11FDC: #35079 TABLE OF CONTENTS SPECIFICATIONS ...

Rev 6.0/12-13 28 28 MTCL8HV11FDC: #35079 The Load Capacity of most Powr-Grip lifters is based on a friction coefficient of 1 (only Flat Lifters are

Rev 6.0/12-13 29 29 MTCL8HV11FDC: #35079 clinging to sealing edges.16 Wipe all residue from the pad face, and allow the pad to dry completely befo

Rev 6.0/12-13 30 30 MTCL8HV11FDC: #35079 REMOTE CONTROL SYSTEM TEST If the lifter is equipped with a Remote Control System, perform this test in th

Rev 6.0/12-13 31 31 MTCL8HV11FDC: #35079 TILT LATCHES ADJUSTMENT If it becomes difficult to disengage or lock out the tilt latches (see OPERATION:

Rev 6.0/12-13 32 32 MTCL8HV11FDC: #35079 AIR FILTER MAINTENANCE − LARGE (for 4.4 oz [130 ml] bowl size filters) Filter Function and Conditions Requ

Rev 6.0/12-13 33 33 MTCL8HV11FDC: #35079 VACUUM PUMP MAINTENANCE − DYNAFLO DV1032102 WARNING: Before proceeding with any maintenance, disconnect p

Rev 6.0/12-13 34 34 MTCL8HV11FDC: #35079 VACUUM SWITCH ADJUSTMENT Vacuum Switch Function Two vacuum switches control various functions of the vacuu

Rev 6.0/12-13 35 35 MTCL8HV11FDC: #35079 • n_3 = -422. This setting turns off the low vacuum warning buzzer, light and/or strobe light and turns o

Rev 6.0/12-13 36 36 MTCL8HV11FDC: #35079 REPLACEMENT PARTS LIST Stock No. Description Qty. 93220 Dynaflo Vacuum Pump - Diaphragm Type - 1-SCFM [28

Rev 6.0/12-13 37 37 MTCL8HV11FDC: #35079 LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of

Rev 6.0/12-13 2 2 MTCL8HV11FDC: #35079 MAINTENANCE ...

Rev 6.0/12-13 38 38 MTCL8HV11FDC: #35079

Rev 6.0/12-13 39 39 MTCL8HV11FDC: #35079

Rev 6.0/12-13 40 40 MTCL8HV11FDC: #35079

Rev 6.0/12-13 3 3 MTCL8HV11FDC: #35079 SPECIFICATIONS Model Number: MTCL8HV11FDC Description: Designed for use with a crane or other hoisting equi

Rev 6.0/12-13 4 4 MTCL8HV11FDC: #35079 WARNINGS Powr-Grip is pleased to offer the most reliable vacuum lifters available. Despite the high degree

Rev 6.0/12-13 5 5 MTCL8HV11FDC: #35079 OPERATING FEATURES Note: Components featured in the following instructions for assembling, operating or ma

Rev 6.0/12-13 6 6 MTCL8HV11FDC: #35079 OPTIONAL REMOTE CONTROL SYSTEM OPTIONAL RADIO TRANSMITTER 1 RADIO RECEIVER 2 RADIO TRANSMI

Rev 6.0/12-13 7 7 MTCL8HV11FDC: #35079 ASSEMBLY TO SET UP THE LIFTER 1) Open the shipping container and remove all materials for restraining or p