Woods-powr-grip P211047DC Manuel d'utilisateur

KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version MODEL NUMBERS: P2110445DCO, P211047DCO, P2HV110445DCO, P2HV11047DCO SERIAL NUMBER:

Rev 12.0/12-12 8 P2-04-DCO: #35114: TO APPLY THE PADS TO A LOAD Positioning the Lifter on the Load Make certain that the contact surfaces of the loa

Rev 12.0/12-12 9 P2-04-DCO: #35114: Vacuum Level on Optimal Surfaces When the lifter is attached to clean, smooth, nonporous load surfaces, it shoul

Rev 12.0/12-12 10 P2-04-DCO: #35114: TO LIFT AND MOVE THE LOAD Positioning the Lift Frame WARNING: Lift frame must be oriented vertically to lift

Rev 12.0/12-12 11 P2-04-DCO: #35114: Controlling the Lifter and Load When the vacuum indicators show that the lifter is ready, use the hoisting equi

Rev 12.0/12-12 12 P2-04-DCO: #35114: TO TILT THE LOAD WARNING: Never disengage both the rotation latch and the tilt latches at the same time This

Rev 12.0/12-12 13 P2-04-DCO: #35114: AFTER USING THE LIFTER Leave both valve handles in the “RELEASE” position (power off). CAUTION: Do not set t

Rev 12.0/12-12 14 P2-04-DCO: #35114: MAINTENANCE WARNING: Always make sure battery is disconnected before servicing lifter. INSPECTION SCHEDULE

Rev 12.0/12-12 15 P2-04-DCO: #35114: If any deficiency is detected during the inspection, correct it before using the lifter. If necessary, retur

Rev 12.0/12-12 16 P2-04-DCO: #35114: MAINTENANCE SCHEDULE Unless specified elsewhere in this INSTRUCTIONS manual, the lifter does not require mainte

Rev 12.0/12-12 17 P2-04-DCO: #35114: Identify the input voltage marked on the battery charger, and plug it in to an appropriate power source.10 The

Rev 12.0/12-12 18 P2-04-DCO: #35114: • Contaminates on the pad face or sealing edges: Soil build-up can prevent pads from sealing adequately or r

Rev 12.0/12-12 19 P2-04-DCO: #35114: VACUUM TEST Test the vacuum system for leakage routinely, as directed in the preceding INSPECTION and TESTING S

Rev 12.0/12-12 20 P2-04-DCO: #35114: AIR FILTER MAINTENANCE (for brass bowl type filters) Filter Function and Conditions Requiring Service An air fi

Rev 12.0/12-12 21 P2-04-DCO: #35114: VACUUM PUMP MAINTENANCE − DYNAFLO DV1032102 WARNING: Before proceeding with any maintenance, disconnect powe

Rev 12.0/12-12 22 P2-04-DCO: #35114: VACUUM PUMP MAINTENANCE − THOMAS 107CDC20 WARNING: Before proceeding with any maintenance, disconnect power

Rev 12.0/12-12 23 P2-04-DCO: #35114: VACUUM SWITCH ADJUSTMENT Vacuum Switch Function15 A vacuum switch controls the low vacuum warning light and the

Rev 12.0/12-12 24 P2-04-DCO: #35114: Adjustment Procedure WARNING: Lifting capacity decreases whenever vacuum switch is adjusted to maintain lowe

Rev 12.0/12-12 25 P2-04-DCO: #35114: REPLACEMENT PARTS LIST Stock No. Description Qty. 93220 Vacuum Pump - Diaphragm Type - 1-SCFM [28 liters/minut

Rev 12.0/12-12 26 P2-04-DCO: #35114: LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of produ

Rev 3.0/3-09 1 LVWB APPENDIX: #35196 LOW VACUUM WARNING BUZZER SPECIFICATIONS Maximum Alarm Volume: 103 dBa at 2' [60 cm] Function: While th

Rev 12.0/12-12 1 P2-04-DCO: #35114: SPECIFICATIONS Description: Designed for use with a crane or other hoisting equipment, P21104-DC lifters employ

Rev 3.0/3-09 2 LVWB APPENDIX: #35196 If the vacuum system experiences leakage while the lifter is attached to the load, the vacuum pump turns on aut

Rev 12.0/12-12 2 P2-04-DCO: #35114: WARNINGS Powr-Grip is pleased to offer the most reliable vacuum lifters available. Despite the high degree of

Rev 12.0/12-12 3 P2-04-DCO: #35114: OPERATING FEATURES Note: Components featured in the following instructions for assembling, operating or mainta

Rev 12.0/12-12 4 P2-04-DCO: #35114: ASSEMBLY 1) Remove the vacuum lifter’s components from the shipping containers, using care to avoid damaging a

Rev 12.0/12-12 5 P2-04-DCO: #35114: INTENDED USE LOAD CHARACTERISTICS WARNING: This lifter is NOT intended for lifting hazardous materials, such

Rev 12.0/12-12 6 P2-04-DCO: #35114: OPERATING ENVIRONMENT The operator must determine whether the lifter is intended to be used in each work environ

Rev 12.0/12-12 7 P2-04-DCO: #35114: OPERATION BEFORE USING THE LIFTER The operator must determine whether the lifter is capable of performing each