KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version MODEL NUMBER: VL2MAN SERIAL NUMBER: ___________ (please see serial label and record
Rev 1.0/12-12 8 VL2MAN: #35159 OPERATION BEFORE USING THE LIFTER The operator must determine whether the lifter is capable of performing each inten
Rev 1.0/12-12 9 VL2MAN: #35159 TO APPLY THE PADS TO A LOAD Positioning the Lifter on the Load Make certain that the contact surfaces of the load and
Rev 1.0/12-12 10 VL2MAN: #35159 TO LIFT AND MOVE THE LOAD WARNING: Never attempt to lift load when lifter is in horizontal orientation. Controlling
Rev 1.0/12-12 11 VL2MAN: #35159 WHEN THE LIFTER IS NOT IN USE Use the hoisting equipment to gently lower the lifter onto a stable support; then deta
Rev 1.0/12-12 12 VL2MAN: #35159 MAINTENANCE HAND CUP MAINTENANCE Refer to the instructions accompanying individual hand cups for information about
Rev 1.0/12-12 13 VL2MAN: #35159 TESTING SCHEDULE Perform these tests when placing the lifter in service initially and each time following a repair o
Rev 1.0/12-12 14 VL2MAN: #35159 VACUUM PAD MAINTENANCE Friction Coefficient The friction coefficient represents the lifter's ability to resist
Rev 1.0/12-12 15 VL2MAN: #35159 Cleaning Regularly clean the face of each vacuum pad to remove oil, dust and any other contaminates. Acceptable cle
Rev 1.0/12-12 16 VL2MAN: #35159 REPLACEMENT PARTS LIST Stock No. Description Qty. 91620 Hand Cup - Model N5450 /9" [23 cm] Diameter 2-3 91500
Rev 1.0/12-12 17 VL2MAN: #35159 LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of production
Rev 1.0/12-12 1 VL2MAN: #35159 SPECIFICATIONS Description: Designed for use with a crane or other hoisting equipment, VL2MAN lifters employ vacuum
Rev 1.0/12-12 2 VL2MAN: #35159 WARNINGS Powr-Grip is pleased to offer the most reliable vacuum lifters available. Despite the high degree of secur
Rev 1.0/12-12 3 VL2MAN: #35159 OPERATING FEATURES Note: Components featured in the following instructions for assembling, operating or maintaining
Rev 1.0/12-12 4 VL2MAN: #35159 ASSEMBLY TO SET UP THE LIFTER 1) Open the shipping container and remove all materials for restraining or protecting
Rev 1.0/12-12 5 VL2MAN: #35159 TO INSTALL OR REMOVE THE OPTIONAL CENTER ARM When necessary, select a hand cup to match the others found on the vacuu
Rev 1.0/12-12 6 VL2MAN: #35159 INTENDED USE LOAD CHARACTERISTICS WARNING: This lifter is NOT intended for lifting hazardous materials, such as exp
Rev 1.0/12-12 7 VL2MAN: #35159 decreases. If necessary, contact Wood’s Powr-Grip for help in determining the maximum thickness permitted when handl
Commentaires sur ces manuels