KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version MODEL NUMBERS: MT4HV11FDCO, MT6HV11FDCO, MT8HV11FDCO, MT10HV11FDCO SERIAL NUMBER: __
Rev 23.0/1-13 8 MT-HV11FDCO: #35092 OPERATION BEFORE USING THE LIFTER The operator must determine whether the lifter is capable of performing each
Rev 23.0/1-13 9 MT-HV11FDCO: #35092 the lifter still has sufficient capacity to support the load (see INTENDED USE: LOAD CHARACTERISTICS). WARNING:
Rev 23.0/1-13 10 MT-HV11FDCO: #35092 surface.6 Both the apply/release switch and the pad frame control valve must remain in the “APPLY” position th
Rev 23.0/1-13 11 MT-HV11FDCO: #35092 4) Raise the load a minimal distance, to assure that it is supported by the lifter. 5) Monitor the vacuum gau
Rev 23.0/1-13 12 MT-HV11FDCO: #35092 Controlling the Lifter and Load When vacuum indicators show that the lifter is ready, use the hoisting equipmen
Rev 23.0/1-13 13 MT-HV11FDCO: #35092 Releasing the pads locally Move the slide on the pad frame control valve to the “RELEASE” position. After the
Rev 23.0/1-13 14 MT-HV11FDCO: #35092 MAINTENANCE WARNING: Always make sure battery is disconnected before servicing lifter. INSPECTION SCHEDULE Pe
Rev 23.0/1-13 15 MT-HV11FDCO: #35092 If any deficiency is detected during the inspection, correct it before using the lifter. If necessary, return
Rev 23.0/1-13 16 MT-HV11FDCO: #35092 BATTERY TEST The lifter is equipped with a battery gauge to help the operator evaluate whether the battery has
Rev 23.0/1-13 17 MT-HV11FDCO: #35092 BATTERY RECHARGE CAUTION: Charge battery only while lifter’s power switch is in the OFF ( ) position. Oper
Rev 23.0/1-13 18 MT-HV11FDCO: #35092 VACUUM PAD MAINTENANCE Friction Coefficient The friction coefficient represents the lifter's ability to re
Rev 23.0/1-13 19 MT-HV11FDCO: #35092 WARNING: Never use unauthorized rubber cleaners or conditioners to clean vacuum pad. To prevent liquid from co
Rev 23.0/1-13 20 MT-HV11FDCO: #35092 AIR FILTER MAINTENANCE (for 4.4 oz [130 ml] bowl size filters) Filter Function and Conditions Requiring Service
Rev 23.0/1-13 21 MT-HV11FDCO: #35092 VACUUM PUMP MAINTENANCE ― THOMAS 2907CDC22/12 WARNING: Before proceeding with any maintenance, disconnect powe
Rev 23.0/1-13 22 MT-HV11FDCO: #35092 VACUUM PUMP MAINTENANCE − DYNAFLO DV1032102 WARNING: Before proceeding with any maintenance, disconnect power
Rev 23.0/1-13 23 MT-HV11FDCO: #35092 VACUUM SWITCH ADJUSTMENT Vacuum Switch Function A vacuum switch controls the vacuum pump and the vacuum lift li
Rev 23.0/1-13 24 MT-HV11FDCO: #35092 Adjustment Procedure WARNING: Load capacity decreases whenever vacuum switch is adjusted to maintain lower vac
Rev 23.0/1-13 25 MT-HV11FDCO: #35092 REPLACEMENT PARTS LIST Stock No. Description Qty. 93220 Vacuum Pump - Diaphragm Type - 1-SCFM [28 liters/minut
Rev 23.0/1-13 26 MT-HV11FDCO: #35092 LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of produ
Rev 23.0/1-13 1 MT-HV11FDCO: #35092 SPECIFICATIONS Description: Designed for use with a crane or other hoisting equipment, MT-HV11FDC lifters emplo
Rev 23.0/1-13 2 MT-HV11FDCO: #35092 WARNINGS Powr-Grip is pleased to offer the most reliable vacuum lifters available. Despite the high degree of
Rev 23.0/1-13 3 MT-HV11FDCO: #35092 OPERATING FEATURES Note: Components featured in the following instructions for assembling, operating or mainta
Rev 23.0/1-13 4 MT-HV11FDCO: #35092 ASSEMBLY 1) Open the shipping container and remove all materials for restraining or protecting the vacuum lift
Rev 23.0/1-13 5 MT-HV11FDCO: #35092 3) Carefully remove the remote vacuum package from the shipping container, and attach the vacuum package secure
Rev 23.0/1-13 6 MT-HV11FDCO: #35092 INTENDED USE LOAD CHARACTERISTICS WARNING: This lifter is NOT intended for lifting hazardous materials, such a
Rev 23.0/1-13 7 MT-HV11FDCO: #35092 OPERATING ENVIRONMENT The operator must determine whether the lifter is intended to be used in each work environ
Commentaires sur ces manuels